=====================  Product Identification  =====================

Product ID:KRYLON DECORATOR PAINTS
MSDS Date:02/01/1994
FSC:NIIN:Submitter:D DG
Status Code:A
MSDS Number: CKPLC
=== Responsible Party ===
Company Name:KRYLON DIV SHERWIN-WILLIAMS CO
Address:31500 SOLON RD
City:SOLON
State:OH
ZIP:44139
Country:US
Info Phone Num:800-247-3266
Emergency Phone Num:216-292-7400
CAGE:JO607
=== Contractor Identification ===
Company Name:KRYLON DIV SHERWIN-WILLIAMS CO
Address:31500 SOLON RD
Box:City:SOLON
State:OH
ZIP:44139
Country:US
Phone:800-247-3266
CAGE:JO607
Company Name:WALTER RB AFFIL OF SAX ARTS AND CRAFTS INC
Address:2405 S CALHOUN RD
Box:51710
City:NEW BERLIN
State:WI
ZIP:53151-0710
Country:US
Phone:414-784-6880
Contract Num:MDA414-00-P-1757
CAGE:0RKV4

=============  Composition/Information on Ingredients  =============

Ingred Name:PROPANE
CAS:74-98-6
RTECS #:TX2275000
= Wt:14.
OSHA PEL:1800 MG/M3;1000 PPM

Ingred Name:V. M. & P. NAPHTHA
CAS:64742-89-8
= Wt:3.

Ingred Name:ALIPHATIC PETROLEUM DISTILLATE
CAS:64742-48-9
= Wt:19.

Ingred Name:XYLENE
CAS:1330-20-7
RTECS #:ZE2100000
= Wt:14.
ACGIH TLV:434 MG/M3;100 PPM
ACGIH STEL:651 MG/M3;150 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:ACETONE
CAS:67-64-1
RTECS #:AL3150000
= Wt:37.
OSHA PEL:2400 MG/M3;1000 PPM
ACGIH TLV:1780 MG/M3;750 PPM
ACGIH STEL:2380 MG/M3;1000 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:2-METHYLPROPANE
CAS:75-28-5
RTECS #:TI4300000
= Wt:14.

Ingred Name:TOLUENE
CAS:108-88-3
RTECS #:XS5250000
= Wt:8.
OSHA PEL:SEE TABLE Z-2
ACGIH TLV:188 MG/M3;50 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:ETHYLBENZENE
CAS:100-41-4
RTECS #:DA0700000
= Wt:4.
OSHA PEL:435 MG/M3;100 PPM
ACGIH TLV:434 MG/M3;100 PPM
ACGIH STEL:543 MG/M3;125 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:COPPER
CAS:7440-50-8
RTECS #:GL5325000
= Wt:4.
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:ORAL (RAT) IS UNKNOWN.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:IRRITATION OF EYES, SKIN & RESPIRATORY
    SYSTEM. MAY CAUSE NERVOUS SYSTEM DEPRESSION. EXTREME OVEREXPOSURE
    MAY RESULT IN UNCONSCIOUSNESS & POSSIBLY DEATH. CHRONIC-PROLONGED
    OVEREXPOSURE TO SOLVENT INGRE DIENTS MAY CAUSE ADVERSE EFFECTS TO
    THE LIVER, URINARY, BLOOD-FORMING, CARDIOVASCULAR, & REPRODUCTIVE
    SYSTEMS. REPORTS HAVE ASSOCIATED REPEATED & PROLONGED OVEREXPOSURE
    TO SOLVENTS WITH PERMANENT BRAI N DAMAGE.
Explanation of Carcinogenicity:NO INGREDIENT IN THESE PRODUCTS IS AN
    IARC, NTP OR OSHA LISTED CARCINOGEN.
Effects of Overexposure:HEADACHE, DIZZINESS, NAUSEA, AND LOSS OF
    COORDINATION ARE INDICATIONS OF EXCESSIVE EXPOSURE TO VAPORS OR
    SPRAY MISTS. REDNESS AND ITCHING OR BURNING SENSATION MAY INDICATE
    EYE OR EXCESSIVE SKIN EXPOSU RE.
Medical Cond Aggravated by Exposure:NONE GENERALLY RECOGNIZED.

=======================  First Aid Measures  =======================

First Aid:IF INHALED: IF AFFECTED, REMOVE FROM EXPOSURE. RESTORE
    BREATHING. KEEP WARM AND QUIET. IF ON SKIN: WASH AFFECTED AREA
    THOROUGHLY WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING AND
    LAUNDER BEFORE RE -USE. IF IN EYES: FLUSH EYES WITH LARGE AMOUNTS
    OF WATER FOR 15 MINUTES. GET MEDICAL ATTENTION. IF SWALLOWED: GET
    MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:<-17.6C, 0.F
Lower Limits:0.9
Upper Limits:13.1
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM. WATER SPRAY MAY
    BE INEFFECTIVE
Fire Fighting Procedures:FULL PROTECTIVE EQUIPMENT INCLUDING
    SELF-CONTAINED BREATHING APPARATUS SHOULD BE USED. WATER SPRAY MAY
    BE INEFFECTIVE. IF WATER IS USED, FOG NOZZLES ARE PREFERABLE. WATER
    MAY BE USED TO COOL CLOSED CO NTAINERS TO PREVENT PRESSURE BUILD-UP
    AND POSSIBLE AUTOIGNITION OR EXPLOSION WHEN EXPOSED TO EXTREME
    HEAT.
Unusual Fire/Explosion Hazard:ISOLATE FROM HEAT, ELECTRICAL EQUIPMENT,
    SPARKS, & OPEN FLAME. CLOSED CONTAINERS MAY EXPLODE WHEN EXPOSED TO
    EXTREME HEAT. APPLICATION TO HOT SURFACES REQUIRES SPECIAL
    PRECAUTIONS. DURING EMERGENCY CO NDITIONS OVEREXPOSURE TO
    DECOMPOSITION PRODUCTS MAY CAUSE A HEALTH HAZARD.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE AND
    REMOVE WITH INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, & OPEN
    FLAME. DURING USE & UNTIL ALL VAPORS ARE GONE - KEEP AREA
    VENTILATED. CONTENTS UNDER PRESSURE. DO NOT PUNCTURE, INCINERATE,
    OR EXPOSE TO TEMPERATURE ABOVE 120F. HEA T FROM SUNLIGHT,
    RADIATORS, STOVES, HOT WATER, & OTHER HEAT SOURCES COULD CAUSE
    CONTAINER TO BURST.
Other Precautions:INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND
    INHALING THE CONTENTS CAN BE HARMFUL OR FATAL. DO NOT SMOKE -
    EXTINGUISH ALL FLAMES, PILOT LIGHTS, & HEATERS - TURN OFF STOVES,
    ELECTRIC TOOLS & AP PLICANCES, & ANY OTHER SOURCES OF IGNITION. 
    USE APPROVED BONDING & GROUNDING PROCEDURES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR A PROPERLY FITTED ORGANIC VAPOR/PARTICULATE
    RESPIRATOR APPROVED BY NIOSH/MSHA FOR PROTECTION AGAINST MATERIALS,
    IF NECESSARY. WHEN SANDING OR ABRADING THE DRIED FILM, WEAR A
    DUST/MIST RESPIRATOR  APPROVED BY NIOSH/MSHA FOR DUST WHICH MAY BE
    GENERATED FROM THIS PRODUCT, UNDERLYING PAINT, OR THE ABRASIVE.
Ventilation:LOCAL EXHAUST PREFERABLE. GENERAL EXHAUST ACCEPTABLE IF THE
    EXPOSURE TO MATERIALS IS MAINTAINED BELOW APPLICABLE EXPOSURE
    LIMITS.
Protective Gloves:NONE REQUIRED FOR NORMAL APPLICATION/CHEMICAL
    RESISTANT FOR REPEATED CONTACT.
Eye Protection:WEAR SAFETY SPECTACLES WITH UNPERFORATED SIDESHIELDS.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH HANDS AFTER USING.
Supplemental Safety and Health
THIS COATING MAY CONTAIN MATERIALS CLASSIFIED AS NUISANCE PARTICULATES
    WHICH MAY BE PRESENT AT HAZARDOUS LEVELS ONLY DURING SANDING OR
    ABRADING OF THE DRIED FILM.  P/N (SAX ARTS & CRAFTS) 317-0099, KR
    YLON SPRAY ENAMEL (BRIGHT GOLD).  P/N (KRYLON ) 1701 BRIGHT GOLD

==================  Physical/Chemical Properties  ==================

HCC:V3
Boiling Pt:<-17.6C, 0.F
B.P. Text:<0-320F
Vapor Density:>AIR
Evaporation Rate & Reference:FASTER THAN ETHER

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:BY FIRE: CARBON DIOXIDE, CARBON
    MONOXIDE, OXIDES OF METALS.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

=====================  Ecological Information  =====================

Ecological:NOT PROVIDED

====================  Disposal Considerations  ====================

Waste Disposal Methods:WASTE FROM THIS PRODUCT MAY BE HAZARDOUS AS
    DEFINED UNDER THE RCRA 40CFR261.  DO NOT INCINERATE. DEPRESSURIZE
    CONTAINER. DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE, AND LOCAL
    REGULATIONS REGARDING P OLLUTION.

===================  MSDS Transport Information  ===================

Transport Information:DOT CLASSIFICATION: ORM-D CONSUMER COMMODITY.

=====================  Regulatory Information  =====================

SARA Title III Information:NOT PROVIDED
Federal Regulatory Information:THIS MATERIAL IS A "HEALTH HAZARD"
    AND/OR A "PHYSICAL HAZARD" AS DETERMINED WHEN REVIEWED ACCORDING TO
    THE REQUIREMENTS OF THE OCCUPATIONAL SAFETY AND HEALTH
    ADMINISTRATION 29 CFR PART 1910.1200 "HAZA RD COMMUNICATION"
    STANDARD.
State Regulatory Information:NOT PROVIDED

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.